Kenwood ProTalk TK-3710 User Manual page 41

VOX Function
VOX (VOX/ Semi-VOX) operation allows you to transmit hands-free. This feature
can be activated or deactivated by your dealer. To operate VOX, you must use an
optional headset.
PF Button:
Press and hold the programmed button to switch the VOX operation On.
• Beep A (1 beep) sounds.
Press this button again to switch the VOX operation Off.
• Beep B (2 beeps) sounds.
Menu Mode:
Select "VOX" and press the [ S ] button to switch the VOX operation On or Off.
• When VOX is On, the "
• When VOX is Off, the "
Refer to "VOICE OPERATED TRANSMISSION (VOX)" {p. 46}.
Zone Delete/ Add
Allows you to include or omit each Zone in the Multi-Zone scan sequence.
1
Select your desired zone.
2 PF Button: Press the programmed button to switch the Zone Delete/Add
status of the channel.
Menu Mode:
Delete/Add status of the channel.
• When a zone is added to scan, Beep A (1 beep) sounds and the "
(left side) indicator appears on the display.
• When a zone is deleted (not include in scan), Beep B (2 beeps) sounds
and the "
" indicator appears on the display.
" indicator disappears on the display.
Select "ZONE D/A" and press the [ S ] button to switch the Zone
" (left side) indicator disappears on the display.
41
"