Table of Contents
Advertisement
For cutting heights above 3 1/2 inches (90 mm) use the
bottom hole. The rollers will still be effective against
1. Anti-scalp roller
mounting bracket
7.
Torque hardware to 27-33 ft-lb (37-45 N-m) or
loss of roller may result.
Positioning the Seat
The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
• E-Series Units:
1.
Tip the seat forward.
2.
Loosen the adjustment bolts.
1. Adjustment bolt
Figure 15
scalping.
2. Cutting height
Figure 16
3.
Move the seat to the desired position and
tighten bolts.
4.
Tip the seat back to the closed position.
• S-Series Units:
1.
Push the adjustment lever towards the center
of the machine to release the seat adjuster
track (Figure 17).
g015168
1. Adjustment lever
2.
Move the seat to the desired position and
release the lever to lock in that position.
Changing the Seat Ride
Suspension
The number of seat springs can be changed to
maximize rider comfort. More springs should be used
with heavier operators and on rough terrain. Fewer
springs should be used with lighter operators and
when mowing smooth, well established lawns. Always
keep the number of springs on the left and right side
the same when adding and removing springs.
g237245
29
Operation
Figure 17
g237277
Advertisement
Table of Contents
