Table of Contents
Advertisement
5.
Separate the foam and paper elements.
Cleaning the Foam and Paper Elements:
Foam Element:
Wash the foam element with water.
Important: Replace the foam element if it is
torn or worn.
Figure 26
Figure 27
Figure 28
Paper Element:
1.
Lightly tap the element on a flat surface to remove
dust and dirt.
2.
Inspect the element for tears, an oily film, and
damage to the seal.
Important: Do not clean the paper element
with pressurized air or liquids, such as
solvent, gas, or kerosene. Replace the paper
element if it is damaged or cannot be cleaned
g027800
thoroughly.
To learn more about the Exmark twin-cylinder engine
go to https://exmark.com/engines or scan the QR
code.
702 and 708cc Engine
Checking the Engine Oil Level
Service Interval: Before each use or daily
g027801
Important: Do not overfill the crankcase with oil
and run the engine; engine damage may result.
1.
Park the machine on a level surface, disengage
the blade control switch, stop the engine, engage
parking brake, and remove the key.
2.
Make sure the engine is stopped, level, and is cool
so the oil has had time to drain into the sump.
3.
To keep dirt, grass clippings, etc., out of
the engine, clean the area around the oil fill
cap/dipstick before removing it.
4.
Check the engine oil level.
g027802
39
Maintenance
Figure 29
g028322
Advertisement
Table of Contents
