Table of Contents
Advertisement
Check Rollover Protections
Systems (Roll Bar) Knobs
Service Interval: Before each use or daily
Check that both the mounting hardware and the
knobs are in good working condition. Make sure the
knobs are fully engaged with the ROPS in the raised
position. The upper hoop of the roll bar may need
to be pushed forward or pulled rearward to get both
knobs fully engaged.
1. Engaged
Check Seat Belt
Service Interval: Before each use or daily
Visually inspect seat belt for wear, cuts, and proper
operation of retractor and buckle. Replace before
operating if damaged.
Check for Loose Hardware
Service Interval: Before each use or daily
1.
Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
2.
Visually inspect machine for any loose hardware
or any other possible problem. Tighten hardware
or correct the problem before operating.
Service Air Cleaner
Service Interval: Every 250 hours—Replace
the primary air cleaner
element — check
Figure 42
2. Partially engaged — Do
Not operate with ROPS
in this condition.
1.
Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
2.
See the Engine Owner's Manual for maintenance
instructions.
Check Air Filter Assembly (if
g008619
equipped)
Service Interval: As required
Important: To prevent engine damage, always
operate the engine with both air filters and cover
installed.
1.
When checking or replacing the air filter element,
make sure the air filter assembly is installed in the
brackets.
2.
Position the air cleaner cover so that the
breather valve does not interfere with the throttle
mechanism.
61
Maintenance
secondary air cleaner
element; replace if dirty.
(May need more often
under severe conditions.
See the Engine Owner's
Manual for additional
information.)
Every 500 hours—Replace
the secondary air cleaner
element (May need more
often under severe
conditions. See the
Engine Owner's Manual
for additional information.)
Hide quick links:
Advertisement
Table of Contents
