Exmark QUEST Setup Instructions

Loose Parts
Use the chart below to verify that all parts have been shipped. Part numbers not shown are available on the dealer
extranet.
Dealer Pack
Part #
3256-25
3272-10
120-5512
116-2670
104-8300
103-2106
Literature Pack
Part #
—
—
—
95-3270
106-7022
Checking Tire Pressure
1. Check the tire pressure in the drive and caster tires.
Proper inflation for drive tires is 13 psi (90 kPa).
Proper inflation for the caster tires is:
• ribbed tread–13 psi (90 kPa)
• smooth tread–20 psi (138 kPa)
2. Adjust if necessary.
Connecting Foot Pedal —
50 Inch Unit Only
1. Remove the washer and cotter pin from the dealer
literature pack.
2. Rotate the foot pedal forward.
3. Insert the rod into the foot pedal hole, install washer,
and secure with the cotter pin (see Figure 1).
© 2011—Exmark Mfg. Co., Inc.
P.O. Box 808
Beatrice, NE 68310
Description
Washer
Pin, Cotter
Plate, Seat Stop
Screw-Shoulder HHF 5/16-18 x .96
Nut-Nyloc 5/16-18 Flg
Key, Exmark Logo
Description
Manual, Operator's
Manual, Engine Operator's
DVD, Exmark Training Material
Hose, Connector
Hose, Oil Drain
Setup Instructions
For Serial Nos. 920,000 & Higher
Qty.
1 Connect the foot pedal – 50 inch unit
only.
1
1
1 Connect the seat stop.
1
Fill out the online warranty registration
1 form and place keys into literature
pack.
Qty.
1
Read before operating the machine.
1
1 View before operating the machine.
1 Washing underside of mower
1 Draining engine oil
QUEST
®
Use
Use
Part No. 4500-896 Rev. A
Printed in the USA
All Rights Reserved