Advertisement
Quick Links
Packing List
In addition to this guide, the package includes the following items:
IR-712-MTCP
CA-IR-SH2251 * 2
(IR-712-MTCP)
Technical Support
service@icpdas.com
www.icpdas.com
For Desktop Web
IR-712-MTCP(-5) Quick Start
CA-IR-SH2251-5 * 2
(IR-712-MTCP-5)
Resources
How to search for drivers, manuals and
spec information on ICP DAS website.
For Mobile Web
Model Name
Model Name
v1.6, Jun 2020
P1
Advertisement
Related Manuals for ICP DAS USA IR-712-MTCP
Summary of Contents for ICP DAS USA IR-712-MTCP
- Page 1 IR-712-MTCP(-5) Quick Start v1.6, Jun 2020 Packing List In addition to this guide, the package includes the following items: IR-712-MTCP CA-IR-SH2251 * 2 CA-IR-SH2251-5 * 2 (IR-712-MTCP) (IR-712-MTCP-5) Resources How to search for drivers, manuals and Technical Support spec information on ICP DAS website.
- Page 2 1. Check operation mode Push DIP switch to the position of normal operation mode (OP). 2. Connect to PC by Ethernet...
- Page 3 3. Plug in an IR Emitter Cable Plug the IR emitter cable CA-IR-SH2251(-5) into the 3.5 mm jack of the IR Output 1. 4. Power Wire Connection Connect the power supply cable (+10 ~ +30 VDC) to the power connector. +10 ~ 30 V 5.
- Page 4 (2) Click the “Search Modules” button. (3) Click OK button after selecting the “Network Interface” to the IR-712-MTCP. (4) Mouse double clicking the row of the searched IR-712-MTCP. (5) Enter the main window of the IR-712-MTCP utility when communication connected.
- Page 5 7. Set Device and IR Command Quantity Please click the “Set Device & IR Command Quantity” button to open the setup window. Three steps to go: Step 1: Set device quantity. (1) Set the Device Quantity to be 1. (2) Press the “Set” button. (3) Press the Next (right arrow) button.
- Page 6 Step 2: Configure the IR device names and its IR command quantity. (1) Enter Device Name and IR Command Quantity. (2) Press the “Set” button. (3) Press the Next (right arrow) button. Step 3: Set each IR command name Type the IR command name and “Enter” or click “Set” button. The prefix number (e.g.
- Page 7 8. Learn IR Commands In the section “Test and Save Learned IR Commands” of the IR utility: (1) Select the item in “Device Name” and “Command Name” combobox. (2) Click “Learn On” button to enable IR learning mode (TR/LN LED is ON).
- Page 8 After IR learning finishes, click Menu [Download]-> [Download IR Commands to IR-712-MTCP]. 10. Test IR Commands Go to the “Test IR Commands in IR-712-MTCP” section: (1) Select IR Command No. (2) Select Output Channel to 1. Aim the IR emitter head to the appliance.