Sanyo VDC-HD3500P User Manual page 9

Perform the following connections according to the installation environment and application of your camera.
A
Audio Jack Connection
B Alarm Cable Connection
C Power Connection
D
Network Connection
E
Camera Monitor Connection
Before attempting the following connections, be sure to turn off all components of your system.
Improper connection may cause smoke or failures. Before attempting to connect each system
component, carefully read the instruction manual that comes with it to familiarize yourself with the
correct connection procedure.
AUDIO IN Jack (White)
Use this jack to connect an optional external microphone to listen to the sound while monitoring the surveillance
video, or simultaneously record the video and sound.
AUDIO OUT Jack (Black)
Connect this jack via an audio cable to the audio input jack of an amplified speaker system or the monitor.
Alarm Input Terminal Connection
Connect an alarm switch, infrared sensor, or other device to detect alarm conditions to the alarm input cable.
ALARM IN1: Red
Introduction 9/16