Sanyo VDC-HD3500P User Manual page 13

After installing the lens to the camera, you need to perform the following adjustments for the lens.
A
Angle of View/Focus Adjustment (FOCUS ASSIST)
B Iris Adjustment (IRIS)
Using network operation, you can use the focus assist function to adjust the focus.
Use the focus assist function to accurately focus on subject in high-resolution megapixel image because otherwise
doing so would be extremely difficult.
When focus cannot be adjusted normally because the video images are too dark or too bright, adjust
the lens iris first (
The focus must be readjusted if the camera has lost focus due to difference in the subject distance or
ambient temperature, the deterioration of the lens and installation environment, and the like that have
been caused over the years.
1
Press the SET button for 2 seconds or more.
The monitor now shows the SELECT MENU screen.
On the SELECT MENU screen, all information is displayed in English.
2
Select [FOCUS ASSIST] using the NEAR/FAR button and press the SET button.
The monitor now shows the focus adjustment screen.
B
).
Introduction 13/16