Sanyo VDC-HD3500P User Manual page 80

3
Click in the stream list.
SET
The camera will reboot and the settings you configured will be enabled.
1
Select the check box next to the stream you want to delete and click
The selected stream is deleted from the stream list.
2
Click SET in the stream list.
The camera will reboot and the settings you configured will be enabled.
Configure the conditions of the audio you receive from the camera.
1
In [MIC SENSITIVITY], specify the microphone sensitivity.
Select the sensitivity of the microphone connected to the camera from 8 levels.
+4, +3, +2, +1, 0, –1, –2, –3
2
In [FILTER(500Hz)], enable or disable the audio filter.
The audio filter reduces the 500 Hz or less frequency components of the audio.
A filter option with a lower negative dB value produces larger effects.
ON(-3dB), ON(-6dB), OFF
3
In [OUTPUT LEVEL], select the desired audio output level and click
Here, you specify the gain value of the audio output amplifier from the following 4 levels.
+2, +1, 0, –1
Working with Administrator Configuration Screens 19/66
.
DELETE
.
SET