Sanyo VDC-HD3500P User Manual page 89

You can click one grid cell after another to set or cancel the masked area cell by cell.
To deselect a block of grid cells in the masked area, right-click one of grid cell and drag the mouse.
3
Click and then
SET
The settings are saved and you return to the sub menu.
Follow the step below to perform backlight compensation when a human face is detected.
A human face may not be detected if obscured by a hat, sunglasses, or mask, or if the monitoring angle is not
appropriate.
In [BLC], select "FACE" and click
With either of the following settings, backlight compensation will not work even if any human face is
detected.
[AGC] is set to "OFF".
[SHUTTER] is set to "SHORT" or "LONG".
Configure the electronic shutter according to the movement and luminance level of the subject.
Disables the electronic shutter or electronic iris function.
OFF:
SHORT: Enables the fast shutter mode.
Enables the long exposure shutter mode.
LONG:
The configured settings will be applied to "CAM1" or "CAM2", whichever you selected under [VIEW].
The fast shutter mode has a shorter exposure time than the field storage time.
Configuring the fast shutter mode enables you to capture quick motion in the subject.
You cannot select "SHORT" to configure the fast shutter mode if the electronic sensitivity boosting
([SENSE UP] in [IRIS]) is enabled.
.
BACK
.
SET
Working with Administrator Configuration Screens 28/66