ALDI WORKZONE TITANIUM HM80MP User Manual page 10

AUS
Safety regulations
Do not overload your electric tool
6
They work better and more safely in the specified output range.
–
Use the correct electric tool
7
Do not use low-output electric tools for heavy work.
–
Do not use the electric tool for purposes for which it is not intended. For ex-
–
ample, do not use handheld circular saws for the cutting of branches or logs.
Do not use the electric tool to cut firewood.
–
Wear suitable clothing
8
Do not wear wide clothing or jewellery, which can become entangled in moving
–
parts.
When working outdoors, anti-slip footwear is recommended.
–
Tie long hair back in a hair net.
–
Use protective equipment
9
Wear protective goggles.
–
Wear a mask when carrying out dust-creating work.
–
Connect the dust extraction device if you will be processing wood, materials
10
similar to wood, or plastics.
ATTENTION! The dust extractor must not be connected when processing met-
–
als. Risk of fire and explosion due to hot swarf or flying sparks! When processing
metals, also remove the dust bag (21).
If connections for dust extraction and a collecting device are present, make
–
sure that they are connected and used properly.
When processing wood, materials similar to wood, and plastics, operation in
–
enclosed spaces is only permitted with the use of a suitable extraction system.
Do not use the cable for purposes for which it is not intended
11
Do not use the cable to pull the plug out of the outlet. Protect the cable from
–
heat, oil and sharp edges.
12 Secure the workpiece
Use the clamping devices or a vice to hold the workpiece in place. In this
–
manner, it is held more securely than with your hand.
An additional support is necessary for long workpieces (table, trestle, etc.) in
–
order to prevent the machine from tipping over.
Always press the workpiece firmly against the working plate and stop in order
–
to prevent bouncing and twisting of the workpiece.
Avoid abnormal posture
13
Make sure that you have secure footing and always maintain your balance.
–
Avoid awkward hand positions in which a sudden slip could cause one or both
–
hands to come into contact with the saw blade.
Take care of your tools
14
Keep cutting tools sharp and clean in order to be able to work better and more
–
safely.
Follow the instructions for lubrication and for tool replacement.
–
14
 support@scheppach.com.au
MODEL: HM80MP PRODUCT CODE: 53666 06/2019
AFTER SALES SUPPORT

HM80MP
1300 855 831