Specifications - Fluke ESA609 User Manual

Specifications

Temperature
Operating ............................................................ 0 °C to 50 °C (32 °F to 122 °F)
Storage ............................................................... -20 °C to 60 °C (-4 °F to 140 °F)
Humidity ................................................................ 10 % to 90 % non-condensing
Altitude
120 V ac mains supply voltage ........................... 5000 m
230 V ac mains supply voltage ........................... 2000 m
Display ................................................................... LCD display
Modes of Operation .............................................. Manual
Power
115 Volt power outlet .......................................... 90 V ac rms to 132 V ac rms, 47 Hz to 63 Hz, 20 A maximum
230 Volt power outlet .......................................... 180 V ac rms to 264 V ac rms, 47 Hz to 63 Hz, 16 A maximum
Power input ......................................................... 115 V 20 A - 2.6 kVA and 230V at 16 A - 4.2 kVA
Weight .................................................................... 0.7 kg (1.5 lb)
Size ......................................................................... 22.9 cm x 17.8 cm x 6.4 cm (9 in x 7 in x 2.5 in)
Safety ..................................................................... IEC 61010-1: Overvoltage Category II, Measurement 300V CAT II, Pollution Degree 2
Electromagnetic Environment ............................. IEC 61326-1: Portable
Emissions Classification ..................................... IEC CISPR 11: Group 1, Class A.
Electromagnetic Compatibility ............................ Applies to use in Korea only. Class A Equipment (Industrial Broadcasting & Communication Equipment)
Agency approvals ................................................. CE, CSA, Australia RCM
Group 1 have intentionally generated and/or use conductively coupled radio-frequency energy which is
necessary for the internal functioning of the equipment itself. Class A equipment is suitable for use in non-
domestic locations and/or directly connected to a low-voltage power supply network.
[1] This product meets requirements for industrial (Class A) electromagnetic wave equipment and the
seller or user should take notice of it. This equipment is intended for use in business environments and is
not to be used in homes.
Electrical Safety Analyzer
Specifications
29
[1]