Fault Analysis And Troubleshooting - HEIDENHAIN BC 110BF User Manual

Fault analysis and troubleshooting |

18 Fault analysis and troubleshooting
No image (LED not lit)
Ensure that the device is supplied with power
Press the Power button to switch on the device
No image (LED shines orange)
Ensure that the signal cable is connected
Ensure that the signal source is switched on and free of error
Image display too bright or too dark (LED shines green)
Adjust the values for contrast and brightness in the OSD menu
Image position is incorrect
Press the – key to run the autoadjust function
Change the values for horizontal or vertical image position in the OSD menu
Vertical or horizontal image distortion
Press the – key to run the autoadjust function
Adjust the clock or phase setting in the OSD menu
If faults cannot be eliminated in the ways described here, or if there are
other malfunctions or impairments:
Refer to the documentation of the machine tool builder
Contact a HEIDENHAIN service agency
HEIDENHAIN | User's Manual TFT-Monitor 12,1" | 06/2022
72