Mounting and commissioning |
13
Mounting and commissioning
The installation or replacement and commissioning of the display unit
are described in the enclosed replacing instructions.
To connect the monitor to the Philips video module, a "monochrome"
adapter cable (length 1 m) ID 510195-01 must be connected to
connector CN4.
The old video module 4022 226 3720 has to be replaced by the new
version 4022 226 3721!
If the monitor is connected to a Philips control teletext module as a
replacement for a monochrome screen, the adapter cable is necessary
as well.
To change from monochrome to color operation on Philips control -
teletext modules 4022 226 3432 and 4022 226 3433, a color video cable
can be fitted in the machine.
See "Video cable for control teletext module C, color".
HEIDENHAIN | User's Manual TFT-Monitor 12,1" | 06/2022
51