Basic Operation - HEIDENHAIN BC 110BF User Manual

Operation | Basic operation
14.2

Basic operation

Power supply / power switch
The device switches on as soon as a supply voltage between AC 100 V and 250 V is
applied.
Factory default setting
The factory default setting of the monitor ensures that all requested timings of the
intended control models are displayed in the best possible quality.
Under normal operating conditions, it is therefore not necessary to change the
preset display parameters.
Should changes to the preset display parameters be necessary or desired, the
setting options described below are available.
The following requirements must be met for the setting options
described below:
The display unit has been sufficiently removed from the housing
so that the operating elements of the monitor are accessible
The power supply of the monitor is connected
A video signal from the connected control is available at the monitor
HEIDENHAIN | User's Manual TFT-Monitor 12,1" | 06/2022
54