Advertisement
3. Route the cables and
3. Route the cables and
connect the power & video
connect the power & video
cables, use the rubber plug
cables, use the rubber plug
to fill the gap of the mounting
to fill the gap of the mounting
base. Then secure the
base. then secure the
mounting base to the ceiling
mounting base to the ceiling
or wall with screws.
or wall with screws.
4. Fix the camera to the mounting base with the lock screw.
4. Before adjusting the three-axis camera mount, preview the
camera on a monitor, then adjust as necessary achieve the
optimum viewing angle.
Pan 0°~345°
5. Before adjusting the three-axis camera mount, preview the
camera on a monitor, then adjust as necessary achieve the
optimum viewing angle.
Rotation 0°~345°
5. Install the dome bubble on the camera with the included screws,
then carefully remove the protective film to complete the installa-
tion.
6. Install the dome bubble on the camera with the included screws,
then carefully remove the protective film to complete the installa-
tion.
Hold it and rotate
Rotation 0°~345°
4
Sponge
Rubber Plug
Mounting Base
Tilt 0°~77 °
Pan 0°~345°
Tilt 0°~77°
Advertisement
