The Mixes Tab - MOTU 828 Mk III Hybrid User Manual

THE MIXES TAB

Click the Mixes tab (Figure 9-2) to gain access to
the 828mk3's eight stereo mix busses. The Mixes
tab displays one mix bus at a time.
Viewing a mix
Choose the mix you wish to view from the mix bus
menu (in the Mixes tab itself, as shown in
Figure 9-2). The menu shows all mixes by name,
followed by the 828mk3 output pair to which each
bus master fader is currently assigned, if any.
Naming a mix
Click the mix name at the top of the mix bus master
fader (Figure 9-2) to edit the name.
Input name
Channel focus
Input pan section
Input fader
Input mute/solo
Input level meter
Scroll bar for input
channels
Figure 9-2: The Mixes tab.
C U E M I X F X
Mixes Mix bus
tab menu
Mic inputs
Assigning a mix bus output
Choose the desired output pair for the mix bus
from the bus output menu (Figure 9-2). The bus
output menu displays all current available
(enabled) 828mk3 output pairs. If a bus is already
assigned to an output pair, the bus name appears
next to the output pair name to indicate that the
output pair is already taken by a bus. Only one bus
can be assigned to any given output pair. If you
choose an output already assigned to another bus,
that bus output will become disabled.
Bus fader
The bus fader (Figure 9-2) controls the overall level
of the mix (its volume on its stereo output). Use the
individual input faders to the left to control
individual input levels.
828mk3 Mix bus 1
inputs
Inputs grouped as
stereo pairs
master
fader
Bus name
Bus output
Bus Reverb
send/return
Bus fader
Bus mute
Bus level meter
69