MOTU 828 Mk III Hybrid User Manual page 56

Figure 7-9: Enabling the MOTU WDM driver in SONAR.
4 Next, in the Audio preferences section, choose
Devices.
5 Check the 828mk3 Hybrid inputs and outputs
that you wish to use and uncheck the ones you
don't, as shown in Figure 7-7 on page 55.
Other audio settings in SONAR
There are a few other settings in SONAR that
impact 828mk3 operation:
1 In the Audio preferences section, choose Driver
Settings.
2 Choose an 828mk3 input and output for
recording and playback timing as shown below in
Figure 7-10. It doesn't matter which input or
output you choose.
56
Figure 7-10: Make sure you have chosen a 828mk3 input and output
for the playback and recording timing master settings.
3 Additionally, if you are using the MOTU WDM
driver, click the Wave Profiler button and run the
Wave Profiler. This process chooses the optimum
settings for the 828mk3 hardware.
Figure 7-11: Running the Wave Profiler in Cakewalk's SONAR.
C O N F I G U R I N G W I N D O W S A U D I O S O F T W A R E