Push-Button Rotary Encoders; Multi-Function Lcd Display - MOTU 828 Mk III Hybrid User Manual

PUSH-BUTTON ROTARY ENCODERS

All of the knobs shown in Figure 6-3 are push-
button digital rotary encoders. In many cases, you
can either push the knob or turn it to make a
setting or toggle the LCD display (depending on
the encoder and setting).

MULTI-FUNCTION LCD DISPLAY

The LCD provides access to the many 828mk3
settings, as well as visual feedback of the current
parameter being modified.
Parameter "zooming"
For many settings, the LCD temporarily "zooms
in" to display a long-throw meter and alpha-
numeric display to give you precise, real-time
feedback as you adjust the setting. For example, if
you change the headphone volume, the LCD will
display a level meter and gain reduction reading
that updates as you turn the volume knob. After a
brief time-out, the display returns to its previous
state before you turned the volume knob.
When viewing CueMix settings
in the LCD, push the CHANNEL
knob to cycle among four main
mixer menus: MIX, IN (inputs),
OUT (outputs) and REVERB.
Turn it to choose a channel.
Turn the PAGE knob to view settings for
each channel. Push it to jump to the
next section or back to the beginning.
Figure 6-3: The 828mk3 front panel controls.
F R O N T P A N E L O P E R A T I O N
Push the PARAM knob to cycle
among three global menus:
CueMix (mixer), AUDIO
(settings) and 828MK3 SETUP.
Turn and/or push the
VALUE knob to adjust
the current setting.
Figure 6-4: The LCD provides feedback as you adjust volume.
Three global menus
Push the PARAM knob to cycle the LCD among
three global menus, described in the rest of this
chapter:
828mk3 SETUP
■
AUDIO (settings)
■
CUEMIX (mixer)
■
The LCD is divided into four
sections that correspond to the
four knobs to the left.
43