How To Remove: Shelf Supports; How To Replace: Lamp - Zanussi ZVEEM6K3 User Manual

Clean all accessories after each use and let them dry. Use only a microfibre
cloth with warm water and a mild detergent. Do not clean the accessories in a
dishwasher.
Do not clean the non-stick accessories using abrasive cleaner or sharp-edged
Accessories
objects.

11.2 How to remove: Shelf supports

Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until it is cold.
Step 2 Carefully pull the shelf supports
up and out of the front catch.
Step 3 Pull the front end of the shelf
support away from the side
wall.
Step 4 Pull the supports out of the rear
catch.
Install the shelf supports in the opposite sequence.

11.3 How to replace: Lamp

WARNING!
Risk of electric shock.
The lamp can be hot.
Always hold the halogen lamp with a cloth to prevent grease residue from burning on the lamp.
Step 1
Turn off the oven. Wait until
the oven is cold.
Top lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
CARE AND CLEANING
3
Put a cloth on the bottom of
1
2
Step 3
the cavity.
61/132