TROUBLESHOOTING
11.2 Removing the shelf supports
Before maintenance, make sure that the appliance is cool. There is a risk of burns.
To clean the appliance, remove the shelf supports.
1. Pull carefully the supports up and out of the front catch.
3
2. Pull the front end of the shelf support away from the side wall.
3. Pull the supports out of the rear catch.
Install the shelf supports in the opposite sequence.
11.3 How to replace: Lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
Always hold the halogen lamp with a cloth to prevent grease residue from burning on the lamp.
Step 1
Turn off the oven. Wait until
the oven is cold.
Top lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
62/136
1
2
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
Step 3
Put a cloth on the bottom of
the cavity.