Introduction; Device Description; Scope Of Delivery - Scheppach SG7300 Translation Of Original Instruction Manual

1.

Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
we wish you much pleasure and success in working
with your new device.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling,
• Failure to comply with the operating instructions,
• Repairs carried out by third parties, unauthorised
specialists,
• Installing and replacing non-original spare parts,
• Application other than specified.
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise
yourself with your device and to use it for its intended
purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must be
read and carefully observed by all operating personnel
before starting the work. The device may only be used
by personnel who have been trained to use it and who
have been instructed with respect to the associated
hazards.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
28 | GB
2. Device description (Fig. 1 - 11)
1. Fuel filler cap
2. Sight glass
3. Transport handle (2x)
4. Holder support foot
5. Support foot (2x)
6. Earthing screw
7. 400 V socket
8. Circuit breaker 400 V
8a. Circuit breaker 230 V
9. Battery
10. 230 V socket (2x)
11. Transport wheels (2x)
12. Reset button for 12 V
13. 12 V connection
14. Ignition key
14a. Ignition lock
15. Voltage indicator
16. Voltage display
17. Pull starter
18. Fuel valve
19. Choke lever
20. Spark plug connector
20a. Spark plug
21. Oil dipstick
22. Oil drain plug
23. Air filter
23a. Grip screw
23b. Foam
3. Scope of delivery (Fig. 3)
• Transport handles (3)
• Hexagonal bolt (M8 x 50) (3a)
• Hexagonal nut, self­locking (3b)
• Washer, plastic (4x) (3c)
• Holder support foot (4)
• Hexagonal bolt (M8 x 20) (4a)
• Locking nut (M8) (4b)
• Support foot (2x) (5)
• Hexagonal bolt (M6 x 12) (9a)
• Locking nut (M6) (9b)
• Transport wheels (2x) (11)
• Wheel axle (11a)
• Spring washer (2x) (11b)
• Washer (2x) (11c)
• Hexagon nut (M12) (11d)
• Spark plug wrench (A)
• Open­ended spanner SW10 (B)
• 12 V cable (C)
www.scheppach.com