Adjustment; Steering Friction; Throttle Grip Friction - TOHATSU MFS 6BZ Owner's Manual

56

ADJUSTMENT

ENOM00073-0

1. Steering friction

Tiller handle type
ENOW00977-0
Do not overtighten the steering friction bolt
or lever, it could result in difficult handling
of the outboard motor, resulting in the loss
of control causing an accident and could
lead to severe injury.
ENON00506-1B
Note
The steering friction adjustment bolt or
lever is used to adjust the friction load of
the steering. Excessive tightening of the
adjustment bolt may cause damage to the
swivel bracket.
ENOM00544-A
Steering friction can be adjusted in
accordance with your preference by
turning the steering friction adjustment
bolt or lever.
EF, MF type
9
1. Steering friction adjustment bolt
2. Increase
3. Decrease
WARNING
1
3
2 2 3
ENOF01417-0
EFT type
3
1. Steering friction lever
2. Decrease
3. Increase
ENOM00074-A

2. Throttle grip friction

ENOW00074-1B
WARNING
Do not overtighten the throttle adjustment
screw or it could result in difficult handling
of the outboard motor, resulting in the loss
of control causing an accident and could
lead to severe injury.
Friction adjustment of the throttle grip
can be made with the throttle adjustment
screw.
2
1. Increase
2. Decrease
3. Throttle friction adjustment screw
1
2
ENOF01418-0
1
3
ENOF00330-0