Stopping The Engine - TOHATSU MFS 6BZ Owner's Manual

Hide thumbs Also See for MFS 6BZ:
Table of Contents

Advertisement

Forward
1. Quickly push the control lever to the
Forward (F) position 32°, where the
gear is connected, while lifting up on
the lock button located under the
control lever grip.
2. Further forward motion will open the
throttle.
Reverse
1. Quickly pull the control lever to the
Reverse (R) position at 32°, where the
gear will be connected, while lifting up
on the lock button located under the
control lever grip.
2. Further rearward motion will open
the throttle.
Acceleration
Open throttle grip or control lever gradu-
ally.
N
1
1. Control lever
ENOM00049-A

5. Stopping the engine

ENOW00868-1
WARNING
Be careful not to remove engine stop switch
lanyard from engine accidentally while boat
is running. Sudden stop of engine can cause
loss of steering control, speed, possibly
leading the crew(s) and or objects on the
boat to be thrown forward due to inertial
force.
Tiller handle type
1. Turn the throttle grip to the slow
position.
1. Throttle grip
2. Put the shift lever in the Neutral posi-
tion.
Run the engine for 2-3 minutes at
idling speed for cooling down if it has
been running at full speed.
3. Push the stop switch for a few sec-
onds to stop the engine.
ENOF00879-2
1. Stop Switch
ENGINE OPERATION
1
1
43
ENOF01107-0
7
ENOF00569-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfs 8bMfs 9.8b

Table of Contents