B.Pro BASIC LINE SK Mounting Instructions

Mounting instructions
BASIC LINE module connectors
for BASIC LINE SK/UK, BASIC LINE W, BASIC LINE N and BASIC LINE EN
Preparation
1. Check package contents for completeness.
2. If applicable, remove side face shelves. Unscrew
fastening screws (1.) and remove side face
shelf/shelves (2.). Fig. 1
Caution!
Secure side shelf/shelves against falling.
Then screw fastening screws into unit housing again.
3. Push together units to be connected. Fig. 2
The ground must be level in the area where the unit
stands for proper mounting of the module connection
plate.
4. Unscrew the screws for the assembly of the module
connection plate on the guest and operator sides of
both units. Fig. 3
If one or more tray slides are mounted, they should
also be removed.
Caution!
Secure tray slide(s) against falling.

Module connection plate: 2 pcs

Mounting instructions
Fig. 1
Fig. 2
Fig. 3