Advertisement
INTRODUCTION
Thank you for choosing to purchase the Linton Mobile Commode/Footrests from Aidapt. The
Linton Mobile Commode and Footrests are manufactured using only the finest materials
available. If used in accordance with the user instructions they should give you many years of
continuous service.
NB. This equipment must be installed by a competent person and a risk assessment
may be needed as to the suitability of the chair for the particular user.
VR166X Commode w/Footrests
VR231X Height adjustable commode w/Footrest
Weight Limit: 190 kg (30 stone)
Do not exceed the weight limit stated – doing so could put the user at risk.
BEFORE USE
Carefully remove all packaging. Avoid using any knives or other sharp instruments as
•
this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault, do
•
not use your product as it may compromise the safety of the user, but contact your
supplier for support.
ASSEMBLY
The package contains the following components:
• The main frame with four brake castors attached
• White commode plastic aperture seat (attached to the main frame)
• Grey commode seat cover
• A pair of detachable arms
• Detachable back
Please read the following installation instructions carefully:
1. Remove all contents from the box
2. Place the assembled base on a level floor
3. At the rear of the commode you will see two black threaded wheel nuts; undo the wheel nuts
so that
the locking holes are clear
4. Place the two back legs into the locating holes on the back edge of the commode frame
5. Secure the back by turning the black lock nuts until you feel the nut biting against the back
leg.
6. Do no over tighten
7. Do not use tools as it is only necessary to have the back secured finger tight
8. Place the two detachable arms into the four locating holes featured two each side of the
commode
Fixing and Maintenance Instructions
2
Advertisement
