Introduction; Before Use; Intended Use - aidapt VR166S Fixing And Maintenance Instructions

INTRODUCTION

Thank you for choosing to purchase the Linton Mobile Commode/Footrests from Aidapt. If used in
accordance with user instructions they should give you many years of continuous service.
NB. This equipment must be installed by a competent person and a risk assessment may
be needed as to the suitability of the chair for the particular user.
VR166S
VR167
Weight Limit: 190kg (30 stone)
Do not exceed the weight limit stated- doing so could put the user at risk.

INTENDED USE

The Linton is a commode or for use over a toilet and may be used to transport persons over short
distances. For Indoor Use Only.

BEFORE USE

• Carefully remove all packaging. Avoid using any knives or other sharp instruments as this may
damage the surface of the product.
• Check the product for any visible damage, if you see any damage of suspect a fault, do not use
your product as it may compromise the safety of the user, but contact your supplier for support.
• Before beginning assembly, ensure you have all necessary parts (see fig. 1):
• A pair of side frames with castors attached (A)
• 1 crossbar with 2 e-clips attached (B)
• A pair of armrests (C)
• A pair of footrests (D)
• Plastic aperture seat with cross piece attached (E)
• Grey seat cover (F)
• Back rest (G)
• Two plastic allen screws (H)
• Bucket (I)
Fixing and Maintenance Instructions
SPLIT DOWN COMMODE/WITH FOOTRESTS
FOOTRESTS (PAIR)
A
fig. 1
C
B
H
2
I
E/F
G
D