Table of Contents
Advertisement
READ BEFORE USE
Before using your new Wheelchair, you and each person that may assist you in its use
should take time to read this manual and follow all instructions.
INTRODUCTION
Thank you for purchasing your wheelchair from Aidapt. This model has been designed
to help you gain independence and meet your particular requirements. Throughout the
manufacturing process, great care has been taken; the components have been selected
by quality and inspections carried out to ensure you get full satisfaction from our product,
including BS EN 12183:2014
PLEASE NOTE:
Your Wheelchair has a unique identification serial number. This is located on the main cross
brace below the seat canvas and should be used in all correspondence.
Write your serial number here for future reference:
This model is intended for assistance pushing use only and not for wheeling by the
person sitting in the Wheelchair.
The maximum user weight is 115 kg; under no circumstances should this be
exceeded
When folding the Wheelchair for transportation in a car the leg rests can be
detached leaving the frame weight of (10.3 kg).
Before each use please take the time to check your Wheelchair for any loose parts.
Any modification to this product without the express permission from Aidapt will
invalidate your guarantee.
SAFETY SUMMARY
The following recommendations are made for the safe use of the wheelchair.
NOTE: Do not assemble or use this equipment without first reading and understanding
this instruction manual.
The helper should not place all of their weight on the handles by lifting their feet off
the floor as this will place adverse strain on the handles.
If you cannot understand the instructions, please contact Aidapt, a Healthcare Professional
or a Dealer before installing this equipment.
Advertisement
Table of Contents
