Page 1
LINTON MOBILE COMMODE & FOOTRESTS This file is available to view and download as a PDF at www.aidapt.co.uk. Sight impaired customers can use a free PDF Reader (such as adobe.com/reader) to zoom in and increase the text size for improved readability.
Page 2
INTRODUCTION Thank you for choosing to purchase the Linton Mobile Commode/Footrests from Aidapt. If used in accordance with user instructions they should give you many years of continuous service. NB. This equipment must be installed by a competent person and a risk assessment may be needed as to the suitability of the chair for the particular user.
Page 3
ASSEMBLY Assembling the frame Take one of the side frames (with castors fitted) (A) and attach crossbar (B) to the lower spigot using the provided e-clip (see fig.2) Make sure the e-clip is secure Take the plastic aperture seat (E) and attach one end of the attached crosspiece onto the upper spigot (see fig.
Page 4
fig. 8 fig. 9 fig. 10 fig. 11 fig. 12 The commode is now ready to use. When the commode is not in use the grey seat cover can be placed over the aperture seat (see fig. 12) PLEASE NOTE A lap strap (VA121S) can be fitted to the chair, which, if required, can help to secure the user in the chair.
Page 5
The information given in this instruction booklet must not be taken as forming part of or establishing any contractual or other commitment by Aidapt Bathrooms Limited, Aidapt (Wales) Ltd or its agents or its subsidiaries and no warranty or representation concerning the information is given.
Need help?
Do you have a question about the VR166S and is the answer not in the manual?
Questions and answers