Table of Contents
Advertisement
85SD-C
3. Press <ESC> to return to the Main Menu when you finish setting up
all items. The following item descriptions are provided as a quick
guide.
Quick Boot Allows you to Enable / disable quick boot of your
Delay for Hard Drive
(Sec.)
1st/2nd/3rd Boot
Device
Try Other Boot De-
Initial Display Mode If option is "Silent", the initial display mode will be
Display Mode at Add-
On ROM Init
S.M.A.R.T. for Hard
system.
Allows you to set the delay time for hard drive
access.
Choices: Disabled; 1~10 sec. (Default: 2)
Allows you to set floppy or IDE devices already in-
stalled to be the 1st/2nd/3rd boot device.
Choises: Disabled; Device(s) installed
Allows you to enable/disable system to try to boot
vices
with other boot devices.
Choises: Yes; No
set to one with Soltek logo. If option is "BIOS", the
normal BIOS display mode will be shown.
Choices: silent (default); BIOS
If the item "Initial Display Mode" is set to "Silent", two
sub-modes are provided for the initial display mode. If
"Force BIOS" is chosen, the vendor's logo screen will be
followed by the "Add-on ROM" initial screen (the screen
showing the add-on card BIOS message). If "Keep Cur-
rent" is chosen, no "Add-On ROM" screen is followed.
Allows you to Enable / disable the Self Monitoring
Disks
Analysis and Reporting Technology for the hard Disk.
Choices: Enabled; Disabled
54
Advertisement
Table of Contents
