Programming - BRAVILOR BONAMAT FRESHONE (G) Operating Principle

1.13

Programming

The program in the FreshBrew machines consists of a simple program carousel.
Refer to the user manual while reading this text.
Pressing the program button activates the program and enables you to activate or change settings.
Pressing the program button again saves the settings and returns the machine to stand−by mode.
1. Open the door with the key.
Fig. 26 Open door
2. Press the program button (4) to start the programming sequence.
3. Reading all drink counters at the same time. The LCD displays an alternating 3− and 6−digit number:
D The 3−digit number indicates the total number of cups, mugs or jugs that have been dispensed since
the counters were last reset to zero (day counter).
D The 6−digit number indicates the total number of cups, mugs or jugs that have been dispensed since
the machine has been in use (total counter).
Fig. 28 Total counter
3.1 Individual readings for dispensed drinks:
D Select the desired drink by pressing one of the selection buttons and select the size by pressing
cup, mug or jug.
The corresponding counter reading is displayed on the LCD.
After a few seconds, the reading returns to that for all drinks.
14
Fig. 27 Program button
Fig. 29 Individual counter readings