Advertisement
1851148
Canterbury Console
Parts required
A. Top Assembly
B. Legs
C. Allen Head Bolts
D. Lock Washers
2. Attach Legs (B) Align the pre-threaded holes in the Legs (B) with the pre-drilled holes in the corner blocks
between the aprons and secure in place with the Allen Head Bolts (C), Lock Washers (D), Flat Washers (E)
using the Allen Head Wrench (F).
3. Attach Finial (G) Insert the Finial (G) into the pre-threaded hole in the front apron and tighten in a clockwise
direction.
4.
Install Drawers Carefully turn the assembled console upright. Slide the drawers into the Top Assembly (A)
and insert the wood dowels into the pre-drilled holes in the slide rails. These will function as a drawer stop.
See Illustration # 2.
G
Page 3 of 3
1 pc
E.
Flat Washers
4 pcs
F.
Allen Head Wrench
8 pcs
G.
Finial
8 pcs
B
A
Illustration # 2
B
A
G
8 pcs
1 pc
1 pc
E
D
C
F
B
R2-4-18-00
B
Advertisement
