Table of Contents
Advertisement
PART 8. INSTALLATION
8.1 Selection of installation equipment
1. Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 50mm space shall be preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant and insulated work
surface material (Wood and similar fibrous or hygroscopic material shall not be used as work surface
material unless impregnated) to avoid the electrical shock and larger deformation caused by the heat
radiation from the hotplate. As shown below:
Note: The safety distance between the sides of the hob and the inner surfaces of the worktop should
be at least 3mm.
A
B
268 mm
500 mm
2. The ceramic cooker hob can be used on the table top of cabinet. The ceramic hob should be placed
horizontally. As shown below:
A
50 mm mini
EN - 18
Copyright © 2019, Fast ČR, a. s.
C
50 mm mini
50 mm mini
B
50 mm mini
SEAL
D
E
50 mm mini
F
G
50 mm mini
3 mm mini
Revision 10/2021
Advertisement
Table of Contents
