Step
1.
Reconnect
harness connector(s).
2.
Clear the DTCs with a scan tool.
3.
Turn OFF the ignition for 30 seconds.
4.
Start the engine.
5
5.
Operate the vehicle within the Conditions for
Running the DTC. You may also operate the
vehicle
within
observed from the Failure Records.
Did the DTC fail this ignition?
Observe the DTC Information with a scan tool.
6
Are there any DTCs that you have not diagnosed?
Action
all
previously
disconnected
the
conditions
that
Engine Control System (4JJ1)
Value(s)
—
you
—
Yes
Go to Step 2
Go to Step 6
Go to DTC List
1A-165
No
System OK