Disassembly Flow Chart; Disassembly Steps - Sony SDM-S76A Service Manual

17" LCD Color Monitor

4. Disassembly flow chart

4.1 Disassembly steps

Notices
1. Lay the monitor on a steady table with a piece of clean cloth mat under it for preventing scratching the panel.
2. Be careful when open the bezel and rear cover with the tool that mentioned above for preventing mangling
them.
3. Put away the screws for preventing rolling on the panel and scratching it.
4. Be careful and don't scratch the connection line when open the shield.
5. Press the interface with a hand and pull or insert the connection line with the other.
Flow Chart
Step
Prepare
Remove
the rear
cover
Figure
27
SDM-S76A
Description
Put the monitor on a clean
soft cloth with panel facing to
the table, and then remove
the four screws on the rear
cover.
Pay attention to the top of the
rear cover marked by red
round, open them with a thin
card, and then you will see
two screws. Unscrew the four
screws.