Table of Contents
Advertisement
17" LCD Color Monitor
8. SRGB color adjustment
a. Select "SRGB" in "COLOR TEMP" and enter.
b. Adjust SRGB R/G/B value to the value of 6500K RGB
9. Service OSD
The service OSD menu contains additional menus as described below.
1) COLOR TEMP: Adjust R/G/B Color values of contrast and brightness in 9300k, 6500k,User color mode.
2) INITIAL EEPROM: Initialize white balance default value.
3) CLR ETI: ETI counter shall be reset to 0H by activating this function.
4) AGING: Enable to set the monitor in the Aging mode or exit from the mode. Select aging mode. (On/off)
5) WHITE BALANCE: Auto
6) DEFAULT TIMING: select the resolution timing of the signal. Menu is 1152 X 864(VESA standard timing) 1152 x
870 (MAC computer timing).
7) MODULE: Panel type
26
SDM-S76A
Advertisement
Table of Contents
