Disassembly Flow Chart; Disassembly Steps - Sony SDM-E96D Service Manual

19" LCD Color Monitor

4. Disassembly Flow Chart

4.1 Disassembly Steps

Notices
1. Lay the monitor on a steady table with a piece of clean cloth mat under it for preventing scratching the panel.
2. Be careful when open the bezel and rear cover with the tool that mentioned above for preventing mangling
them.
3. Put away the screws for preventing rolling on the panel and scratching it.
4. Be careful and don't scratch the connection line when open the shield.
5. Press the interface with a hand and pull or insert the connection line with the other.
Flow Chart
Step
Prepare
Remove the
rear cover
Figure
25
Description
Put the monitor on a clean soft cloth with
panel facing to the table, and then
remove the seven screws.
Pay attention to the hooks marked by
arrowheads, and then open it with a thin
card till the bezel and rear cover
separated.
The rear cover
SDM-E96D