Sony VideoStore VSR-2000 Service Manual page 47

Removal Procedures
Refer to Section 4-6-1.
Installation Procedures
Refer to Section 4-6-1.
Starting the HDD
1. Enter "REBUILD1" and press the [ENTER] key.
(when starting the HDD of the slot 1)
2. Confirm that the following message is displayed.
DPC>REBUILD 1
← (Starts up the HDD of the slot 1.)
Start DISK 1
Confirming the Startup of the HDD
1. Enter "DISK" and press the [ENTER] key.
2. Confirm that the following message is displayed.
DPC>DISK
[Disk Status]
-Rebuild Request : NO
-Rebuilding : YES
-Drive 1 : Rebuilding
-Drive 2 : GOOD
-Drive 3 : GOOD
-Drive 4 : GOOD
-Drive 5 : GOOD
Total Volume=62427M Byte
Remaining Volume=62394 Cluster
VSR-2000
← (during rebuilding)
← (The HDD of the slot 1
is rebuilding.)
4-6. HDD Unit Replacement
4-9 (E)