Sony VideoStore VSR-2000 Service Manual page 45

Removal Procedures
1. Remove the front panel. (Refer to the Section 4-2-1.)
2. Make sure that indicator of the HDD unit to be
replaced lights on.
3. Remove the HDD unit gently while pressing the levers
in the direction of the arrows.
Indicator
HDD unit
n
Place the removed HDD unit on the cushion gently with
the warranty label side down.
HDD unit
VSR-2000
http://getMANUAL.com
Installation Procedures
1. Insert a new HDD unit into the slot gently, and press
2. Attach the HDD No.label which has same number as
Levers
3. Install the front panel. (Refer to Section 4-2-1.)
Cushion
Label side down
the levers in the direction of the arrows to lock the
HDD unit.
removed HDD to the front of the new HDD unit.
. HDD No. label : 3-605-401-01
HDD unit
HDD No. label
4-6. HDD Unit Replacement
Levers
4-7 (E)