Sony VSR-2000A Installation Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Server
  5. VSR-2000A
  6. Installation manual
Sony VSR-2000A Installation Manual

Sony VSR-2000A Installation Manual

Multi access video and audio server, sdi mpeg encoder board, analog mpeg decoder board, upgrade kit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MULTI ACCESS VIDEO AND AUDIO SERVER
VSR-2000A
SDI MPEG ENCODER BOARD
BKSR-2020
ANALOG MPEG DECODER BOARD
BKSR-2031
UPGRADE KIT
BKSR-U2000
INSTALLATION MANUAL
1st Edition

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VSR-2000A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sony VSR-2000A

Summary of Contents for Sony VSR-2000A

  • Page 1 MULTI ACCESS VIDEO AND AUDIO SERVER VSR-2000A SDI MPEG ENCODER BOARD BKSR-2020 ANALOG MPEG DECODER BOARD BKSR-2031 UPGRADE KIT BKSR-U2000 INSTALLATION MANUAL 1st Edition...
  • Page 2 When using a LAN cable: For safety, do not connect to the connector for peripheral device wiring that might have excessive voltage. VSR-2000A (SY) Serial No.10001 and Higher BKSR-2020 (SY) Serial No.10001 and Higher BKSR-2031 (SY) Serial No.10001 and Higher BKSR-U2000 (SY) Serial No.10001 and Higher...

  • Page 3: Table Of Contents

    1-13. HDD Physical Format and Logical Format ........1-17 (E) 1-14. Video System Adjustment ..............1-18 (E) 1-14-1. 525/60 (NTSC) System ............1-19 (E) 1-14-2. 625/50 (PAL) System ............1-22 (E) 1-14-3. System Phase Adjustment ..........1-24 (E) 1-14-4. Subcarrier Phase Adjustment ..........1-25 (E) 1 (E) VSR-2000A...
  • Page 4 ENC-58 Board (BKSR-2020) ..........2-10 (E) 2-6-4. LE-224 Board ..............2-11 (E) 2-6-5. LE-225 Board ..............2-12 (E) 2-6-6. SPG-15 Board ..............2-13 (E) 2-6-7. SY-302 Board ..............2-14 (E) 2-6-8. PU-122 Board ..............2-16 (E) 3. Upgrading 2 (E) VSR-2000A...

  • Page 5: Manual Structure

    Manual Structure Purpose of this manual This manual is the installation manual of the VSR-2000A Multi Access Video and Audio Server and Optional Board. This manual is intended for use by trained system and service engineers, and describes the information regarding installation. It also describes the information regarding the following optional boards, and so on.

  • Page 7: Installation

    Cautions when an Error Appears in a HDD . Treat this unit conform to the above cautions, even when an error appeared. . Keep the unit in the condition in which the error appeared, and record the details of the error. 1-1 (E) VSR-2000A...

  • Page 8: Installation Procedure

    Formatting HDD 1-13. HDD Physical Format and Logical Format Do not block the ventilation slots. If the ventilation slots are blocked, overheating inside the Adjustment 1-14. Video System unit may cause fire. Adjustment 1-2 (E) VSR-2000A...
  • Page 9 . If the power is turned on with the cabinet is removed, the air-cooling effect of the fan will be greatly reduced, damaging the HDD or its data. Avoid operating the unit with the cabinet is removed. 477.7 Unit : mm 1-3 (E) VSR-2000A...

  • Page 10: Power Supply

    2 Plug holder (C) : 3-613-640-01 (Supplied) AC inlet (MAV) For customers in the United Kingdom. 1 Power cord : ! 1-782-929-11 2 Plug holder (C) : 3-613-640-01 (Supplied) Safety earth (Green/Yellow) AC inlet (MAV) Live (Brown) Neutral (Blue) 1-4 (E) VSR-2000A...

  • Page 11: Installing Optional Boards

    Change the setting according to the operating conditions while referring to “2-6. Function of Switches/LEDs on Board” in this manual and “2-1. Description of Internal Switches and Indicator” in the Installation Manual supplied with each option board. 1-5 (E) VSR-2000A...

  • Page 12: Installing Bksr-2020

    Removing replaced, stick the slot label (supplied with BKSR-2020) after inserting the board. . To maintain the cooling effect of the VSR-2000A, do not 4. Fix the BKSR-2020 with the two screws that are used leave the slots open. to fix the blank panel.

  • Page 13: Installing Bksr-2031

    Removing replaced, stick the slot label (supplied with BKSR-2031) after inserting the board. . To maintain the cooling effect of the VSR-2000A, do not 4. Fix the BKSR-2031 with the two screws that have leave the slots open. been used to fix the blank panel.

  • Page 14: Rack Mounting

    Bracket Screw Size Standard Tightening Torque M3.0 0.7 to 1.0 N.m (7 to 10 kgf.cm) M4.0 1.2 to 1.6 N.m (12 to 16 kgf.cm) Bracket B4 x 8 B4 x 8 Outer support assembly 1-8 (E) VSR-2000A...
  • Page 15 Be sure to mount the unit with more than the two persons to avoid back injuries and prevent the unit from falling. Bracket Inner support Rack side Body Outer support 1-9 (E) VSR-2000A...

  • Page 16: Front Panel Assembly Installation/Removal

    (B), remove the front panel assembly. 4 x 20 Panel RK4 x 20 bracket Front panel assembly Ornamental panel Panel bracket Front panel (B) 3. Install the front panel assembly by reversing the disassembling procedure. 1-10 (E) VSR-2000A...

  • Page 17: Hdd Unit Installation

    3. Stick the label with the HDD No. corresponding to the slot on the front. HDD unit Format the HDDs after the HDD unit has been in- stalled (Refer to Section 1-13). HDD unit CAUTION label Cushion Label side down HDD No. label Levers 1-11 (E) VSR-2000A...

  • Page 18: Signal Input And Output

    (standard +4 dBm/600 Z) REMOTE : RS-422A (D-sub 9-pin, Female) VTR CONTROL < External View > Pin No. Signal TX (_) RX (+) TX (+) RX (_) REMOTE : RS-232C (D-sub 9-pin, Female) < External View > Pin No. Signal 1-12 (E) VSR-2000A...
  • Page 19 Status 1 out Slot3-OUT2 Status 2 out Slot3-R Reserved Slot4-IN Command in Slot4-OUT1 Status 1 out Slot4-OUT2 Status 2 out Slot4-R Reserved Slot5-IN Command in Slot5-OUT1 Status 1 out Slot5-OUT2 Status 2 out Slot5-R Reserved Reserved Reserved Reserved Reserved 1-13 (E) VSR-2000A...

  • Page 20: Connecting Connectors And Cable

    When connecting cables to various connectors on the connector panel, connect the following connectors/ cable or their equivalent. VSR-2000A Matching Connector/Cable Panel Indication Connector Connector Sony Part No. REF VIDEO BNC, 75 Z BNC, 75 Z 1-569-370-12 5C-2V cable TIME CODE IN...

  • Page 21: Example Of System Connection

    RCC cable *1 : Do not connect any output video signal supplied form VIDEO OUT of other VTRs, to REF IN of the VSR-2000A. Such connection causes phase shift depending on the operating mode of VTR which can result in incorrect operation of the VSR-2000A.

  • Page 22: Hd (1080/59.94I) System Connection

    . Regarding the HD system, this system supports only the 1080/59.94i format. In this case, use the VSR- 2000A in the NTSC mode. (The VSR-2000A does not support the HD signal in the PAL mode.) To transfer materials between the VSR-2000 and the VSR-2000A, both of the VSR-2000 and the VSR- 2000A must be upgraded to the same version of firmware.

  • Page 23: Switch Setting Of The Connector Panel

    . When physical formatting is completed, confirm that the HDD state is normal. When an error occurs, format again. If an error occurs again, replace the HDD or contact your local Sony Sales Office/Service Center. 2. Upon completion of physical formatting, execute the logical formatting.

  • Page 24: Video System Adjustment

    Tektronix 2446B or equivalent . Composite picture monitor . Extension board EX-649 assembly (A-8321-006-A) Picture monitor Signal generator SONY COMPOSITE Personal computer 75 Z terminal (BZSR-2000 installed) VSR-2000A REF IN COMPOSITE2 COMPOSITE1 75 Z COMPONENT Y terminal COMPONENT R-Y REMOTE COMPONENT B-Y RS-232C...

  • Page 25: 525/60 (Ntsc) System

    Turn 1RV501 (CVBS)/DEC-117 (J- COMPOSITE 1/BKSR-2031 . S903 On an waveform monitor display 9) to adjust the value “A” to satisfy the specifications. . 75 % color bars signal playback Y/C: 100/0/75/0 A = 714 ±7 mV p-p 1-19 (E) VSR-2000A...
  • Page 26 7) to adjust the value “A” to satisfy the specifications. . 75 % color bars signal playback Y/C: 100/0/75/0 A = 756 ±7 mV p-p After the adjustment, set the S903 to the same setting as before. 1-20 (E) VSR-2000A...
  • Page 27 On an waveform monitor display adjust the value “A” to satisfy the specifications. . 100 % color bars signal playback Y/C: 100/0/100/0 A = 700 ±7 mV p-p After the adjustment, set the S903 to the same setting as before. 1-21 (E) VSR-2000A...

  • Page 28: 625/50 (Pal) System

    Turn 1RV501 (CVBS)/DEC-117 (J- . S903 On the tube of waveform monitor 9) to adjust the value “A” to satisfy the specifications. . 75 % color bars signal playback Y/C: 100/0/75/0 A = 700 ±7 mV p-p 1-22 (E) VSR-2000A...
  • Page 29 On an waveform monitor display 7) to adjust the value “A” to satisfy the specifications. . 100% color bars signal playback Y/C: 100/0/100/0 A = 700 ±7 mV p-p After the adjustment, set the S903 to the same setting as before. 1-23 (E) VSR-2000A...

  • Page 30: System Phase Adjustment

    ENTER al computer to the EXT-232C on the key to display the present value. front of the VSR-2000A. 2. In order to delay the output . Select the service port selection video phase from the present...

  • Page 31: Subcarrier Phase Adjustment

    EXT-232C On an Vector monitor display key to display the present value. on the front of the VSR-2000A. 2. In order to delay the subcarrier phase, enter SC\ \ \ \ \ + and press . Select the service port selection...

  • Page 33: Service Overview

    A filter is attached on the rear of the front panel assembly mounted on the MB-755A board. of the VSR-2000A. Accumulation of dirt on the filter blocks ventilation will be If overcurrent flows through the circuit when the power is cause of the heat to build up inside the unit.

  • Page 34: Fan Motor Replacement

    1. Insert the new fan motor unit into the slot completely. 2. Fix the fan motor unit with the two screws. Checking After Replacement Confirm that the error message of the BZSR-2000 disap- pears or the SYSTEM LED indicator (red) does not turn 2-2 (E) VSR-2000A...

  • Page 35: Replacing The Power Supply Unit

    PS2 x 6 When the power supply unit is removed for the purpose other than replacing, be careful not to touch the connector of the power supply unit to prevent contact defects of the power supply unit removed. 2-3 (E) VSR-2000A...

  • Page 36: Replacing The Hdd Unit

    Please order the BKSH-2XX (HDD Unit). HDD unit Levers Be sure to place the removed HDD unit on the cushion gently. Place the HDD unit on the cushion with WARRANTY label side facing downward. HDD unit Cushion Label side down 2-4 (E) VSR-2000A...
  • Page 37 HDD unit whose number is the same as that of the former label on the HDD unit before replacement. . HDD No. label : 3-605-401-01 HDD unit CAUTION label HDD No. label Levers 3. Install the front panel assembly. (Refer to Section 1-7.) 2-5 (E) VSR-2000A...

  • Page 38: Function Of Switches/Leds On Board

    HI position setting switch 1 selected by the combination (Never change) of S101 and S102. S102 (D-4) CPU clock frequency LO position setting switch 2 (Never change) S151 (E-6) Optional operation Factory use only setting switch 2 2-6 (E) VSR-2000A...
  • Page 39 RS-232C selector Selects the target connector of EXT position switch console to which the RS-232C is connected. INT: Output to the internal connector CN204. EXT: Output to the 9-pin connector on the front panel of the console. 2-7 (E) VSR-2000A...
  • Page 40 A+5.0 V power Turns on when the +5.0 V analog Turned on. supply indicator power is supplied to the board. ND201 (D-6) PROGRAM Displays the two digit number that Changes depending on segment indicator is supplied from program. operation. 2-8 (E) VSR-2000A...

  • Page 41: Dec-117 Board (Bksr-2031)

    S903-4 : Factory use only *1 Change the setting according to the video signal in the customer’s area. Ref. No. Address Color Name Function Normal condition D901 (D-2) Green CPU RUN Displays the that the CPU runs normally Lights up indicator 2-9 (E) VSR-2000A...

  • Page 42: Enc-58 Board (Bksr-2020)

    Select the OFF position for normal operation. Ref. No. Address Color Name Function Normal condition D1300 (B-1) Green CPU RUN Displays the that the CPU runs normally Lights up indicator 2-10 (E) VSR-2000A...
  • Page 43 Turns on while accessing the HDD (while accessing the HDD) : Operating normally Note : LEDs D1 to D5 flashes synchronously when the main power is turned on, when the system is reset or when the HDD starts up. 2-11 (E) VSR-2000A...

  • Page 44: Le-225 Board

    . Turns off while re-building the drive. . Flashes when an abnormality of a reference is detected. –––– Green Power . Flashes when a warning is detected by the file Lights up system battery. . Flashes when an internal temperature abnormality is detected. 2-12 (E) VSR-2000A...
  • Page 45 Lights up when the unit is set to NTSC –––––– mode D302 (D-1) Green PAL MODE Lights up when the unit is set to PAL –––––– mode D303 (D-1) Green REF. VIDEO Lights up when a reference video Lights up signal is input. 2-13 (E) VSR-2000A...
  • Page 46 S401-1 : Operating mode setting OFF : Monitor mode ON : Normal mode S401-2 : RS-232C communication mode setting OFF : On-board (CN401) ON : Front panel S401-3 : Factory use only S401-4 : Factory use only 2-14 (E) VSR-2000A...
  • Page 47 For checking the MAIN CPU Lights up operations D406 (F-8) Green FSE CPU RUN For checking the FSE CPU Lights up (IC410) operations D503 (E-6) Green DPC CPU RUN For checking the DPC CPU Lights up (IC513) operations 2-15 (E) VSR-2000A...

  • Page 48: Pu-122 Board

    S101-3 : Factory use only S101-4 : Factory use only S102 (C-7) Reset switch Initialize the PU-122 board –––––– Ref. No. Address Color Name Function Normal condition D102 (G-8) Yellowish green CPU RUN For checking CPU operations Lights up 2-16 (E) VSR-2000A...

  • Page 49: Upgrading

    Section 3 Upgrading This section describes the procedure of upgrading the Procedure VSR-2000 to the VSR-2000A using the upgrade kit BKSR-U2000. Do not lose the removed screws because they will be re- used. Upgrade kit (BKSR-U2000) It consists of the following components: 1.
  • Page 50 Install the PU-122 board in the slot from which the PU-113 board is removed, by reversing the disassem- Front panel bling procedure. 5. Install the SY-302/CCM-37/CCM-38 board as follows. Panel brackets Install the removed CCM-37 or CCM-38 board in the SY-302 board by reversing step 2. 3-2 (E) VSR-2000A...
  • Page 51 B4 x 6 Be sure to place the removed HDD unit on the cushion gently. Place the HDD unit on the cushion with WARRANTY B4 x 6 label side facing downward. HDD unit Cushion Label side down 3-3 (E) VSR-2000A...
  • Page 52 If the power supply unit is not secured completely, the contact resistance of the power connector will be increased and may cause parts damage or smoking. 13. Install the cover and rack angle as follows. Install the cover and rack angle by reversing the step 8. 3-4 (E) VSR-2000A...
  • Page 53 . If you use the BZSR-2000 CD-ROM supplied with the BZSR-2000 of former version before upgrading, your file system will be formatted to the old format so that all functions of the VSR-2000A cannot be used. Be sure to use BZSR-2000 CD-ROM supplied with the BKSR-U2000.
  • Page 55 Kommunen. Entladen sind Batterien in der Regel dann, wenn das Gerät abschaltet und signalisiert “Batterie leer” oder nach längerer Gebrauchsdauer der Batterien “nicht mehr einwandfrei funktioniert”. Um sicherzugehen, kleben Sie die Batteriepole z.B. mit einem Klebestreifen ab oder geben Sie die Batterien einzeln in einen Plastikbeutel. VSR-2000A...
  • Page 56 VSR-2000A (SY) BKSR-2020 (SY) BKSR-2031 (SY) Printed in Japan Sony Corporation BKSR-U2000 (SY) J, E 2002. 5 16 B&P Company 3-620-205-01 ©2002...

This manual is also suitable for:

Bksr-2020Bksr-2031Bksr-u2000

Table of Contents