ASSEMBLY STEPS
STEP 1—REMOVE MOTOR COVER AND MOTOR CAP COVERS
Tools Used in this Step
#2 Phillips Screwdriver
1. Using a #2 Phillips screwdriver, remove the screw and washer from the top of the motor cover, and the seven
remaining identifi ed screws from the front and sides of the motor cover.
2. While pulling the sides slightly outwards, remove the motor cover from the treadmill frame by pulling upwards.
3. Using a #2 Phillips screwdriver, remove the two screws from the drip guard assembly.
4. Remove the drip guard assembly from the frame.
00247200
TC0056
16
Parts Used in this Step
PART
FE0024
TC0417LBK
TC0417RBK
TC0056
00247200
TC0418BK
TC9005BK
TI0062
TC0443
TC0443
TI0062
DESCRIPTION
SCREW, M5-.8 X 10MM, TRUSS, BLK
SUBASSEMBLY, CAP, MOTOR COVER-LH
SUBASSEMBLY, CAP, MOTOR COVER-RH
BHCS, M5-0.8 X 20MM
WASHER, SPECIAL, #8
SUBASSEMBLY, MOTOR COVER (TC650)
SUBASSEMBLY, MOTOR COVER (TC900)
BHCS, M5-0.8 X 10MM, BLUE PATCH
SUBASSEMBLY, DRIP GUARD
TC4017LBK
FE0024
QTY
7
1
1
1
1
1
1
2
1
TC4017RBK
TC4018BK