Table of Contents
Advertisement
68012001081-JW
Chapter 7 : Advanced Features
7.2.1.2
Making a Selective Call
Prerequisites: Your radio must be preprogrammed for you to use this feature.
Procedure:
1 Press the preprogrammed Selective Call button to dial the preprogrammed ID.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
3 Press and hold the PTT button to start the Selective Call.
The display shows the current zone and channel name.
4 Release the PTT button to listen.
The radio returns to home screen. Repeat
7.2.2
Making Priority Dispatch Calls
If a talkgroup is congested, the Priority Dispatch feature allows you to call the dispatcher on a different
talkgroup. This talkgroup is called the Priority Talkgroup. Each trunking talkgroup can have its own
assigned Priority Talkgroup.Priority Dispatch is not available during Emergency operations. Scan
feature is suspended when Priority Dispatch is initiated.
Prerequisites: Dispatch console that supports this feature must be preprogrammed to use this feature.
Check with your dealer or system administrator for more information on dispatch console supporting
this feature.
Procedure:
1 Press the preprogrammed Priority Dispatch button.
A tone sounds and the radio enters Priority Dispatch mode. The radio exits this mode when the
Priority Dispatch Time Out Timer expires.
2 Before the Priority Dispatch Time Out Timer expires, press and hold the PTT button to transmit.
The display shows the Priority Talkgroup alias.
3 Release the PTT button to listen.
The radio exits Priority Dispatch mode, returns to its original talkgroup, and displays the home
channel alias.
7.2.3
Dynamic Regrouping (Trunking Only)
This feature allows the dispatcher to temporarily reassign selected radios to a particular channel to
communicate with each other.
When your radio is dynamically regrouped, it receives a dynamic regrouping command and
automatically switches to the dynamically regrouped channel. You hear a tone and the display shows
the name of the dynamically regrouped channel.
When the dispatcher cancels dynamic regrouping, the radio automatically returns to the previous zone
and channel.
If you access a zone or channel that has been reserved as a dynamically regrouped mode for other
users, you hear an invalid tone.
42
step 1
to
step 3
to start the Selective Call.
Advertisement
Table of Contents
