Table of Contents
Advertisement
You Hear
Tone Name
A Group of
Failsoft
Medium-
Automatic Call Back
Pitched
Keyfail
Tones
Console Acknowledge
Received Individual
Call
Call Alert Sent
Site Trunking
Short, High-
Low-Battery Chirp
Pitched
Tone
(Chirp)
Two High-
GPS Fails
Pitched
Tones
Ringing
Fast Ringing
Enhanced Call Sent
Phone Call Received
Gurgle
Dynamic Regrouping
Talk Permit
Unique,
New Message
Low-Pitch-
ed Chirp
Unique,
Priority Status
High-Pitch-
ed Chirp
Incremen-
Bluetooth Paired
tal- Pitched
Bluetooth Connected
Tone
Decremen-
Bluetooth Unpaired
tal- Pitched
Bluetooth Disconnec-
Tone
ted
A Group of
Fall Alert Continuous
Very High-
Tone
Pitched
Tones
Critical Fall Alert Con-
tinuous Tone
Heard
When the trunking system fails.
When voice channel is available from previous request.
When encryption key has been lost.
When status, emergency alarm, or reprogram request
ACK is received.
When Call Alert or Private Call is received.
When Call Alert is received by the target radio.
When a SmartZone trunking system fails.
When battery is below preset threshold value.
When the GPS fails or loses signal.
When system is searching for target of Private Call.
When waiting for target of Private Call to answer the
call.
When a land-to-mobile phone call is received.
(When PTT button is pressed) a dynamic ID has been
received.
(When PTT button is pressed) is verifying with the sys-
tem for accepting its transmissions.
When a new message is received.
When a priority message is received.
When Bluetooth accessory is paired with the radio.
When Bluetooth accessory is connected to the radio.
When Bluetooth accessory is unpaired from the radio.
When Bluetooth accessory is disconnected from the
radio.
When radio is in Fall Alert mode and prepares to trans-
mit Emergency Alarm when the timer of this alarm
ends.
When radio is in Fall Alert Enhanced mode and pre-
pares to transmit Emergency Alarm when the timer of
this alarm ends.
68012001081-JW
Chapter 4 : Status Indicators
29
Advertisement
Table of Contents
