Lighting Control; Filter Indicator; Resetting Filter Indicator; Low Battery Indicator - Venduro RA MM-ZM User Manual

ENG

Lighting Control

To switch the lighting ON/OFF, press button A or B� Only use button A to switch the
lighting OFF� [Button C does not switch off the lighting.]
Dim the lighting with an extended press on button B or C�

Filter Indicator

The filter will need cleaning after a certain
period of using the motor�
At the end of this service life, the filter indi-
cator on the RF remote control will light up
red. Resetting the filter time-out can only
be done when the filter service life has
effectively expired.

Low Battery Indicator

As soon as the batteries are low, all the LEDs will briefly light up when you press a but-
ton� The current condition of the cooker hood will only be displayed after that�

Replacing Batteries

The RF remote control requires 2 AAA
batteries� These can be replaced by un-
screwing the screw on the back of the RF
remote control� You can then replace the
old batteries with new ones� When inser-
ting the new batteries, please be careful to
align the + and - symbols on the batteries
with those inside the battery compartment�
42

Resetting Filter Indicator

Use the RF remote control to reset the
filter indicator by pressing button E for 3
seconds�