Function Of The Soft Black Remote Control - Venduro RA SMALL Manual

Function of the soft black remote control

'CLEAN FILTER' INDICATORR
LIGHT ON / OFF
LIGHT +
LIGHT -
Pushing the button or the
Pushing the button will put the motor in position 1. The speed of the motor can be changed
between the Positions 1, 2, 3 and Boost using the
Pushing the button in Position 1 or pushing the button in Boost position has no effect.
If the motor is switched off using the
button, the motor is returned to the last operating position.
Hold down the button for a long time to activate the run-on time if the motor is active.
Switching on the lighting is also possible with the
The lighting cannot be switched off with the
button will swith on the motor.
button or the button.
button and later is switched on again using the same
button.
button; this is only possible with the
EXTRACTION POSITION 1
EXTRACTION POSITION 2
EXTRACTION POSITION 3
EXTRACTION POSITION 4
BOOST FUNCTION
EXTRACTION ON / OFF
MOTOR +
MOTOR -
button .
ENG
41