Table of Contents
Advertisement
MOUNTING THE SST DOCK
The SST Dock can be mounted with the invertable mounting bracket in 2 different angels. Use the
extended screws and plastic spacer included in the box.
Wall mounting
The provided mounting brackets can be used to mount the SST Dock to a wall or table. Mounting
screws and plug are not provided. WatchGas recommends to check the strength of the mounting
area and to select the proper mounting hardware before mounting the SST Dock. Mounting the SST
Dock must be performed by a qualified installation contractor.
SST Dock on a wall
SST Dock on a table
Installing the brackets
SWITCH ON THE SST DOCK
If the SST Dock is fully discharged, please allow 5 min of charging prior to switching on the unit.
LED will show red switching to white when prior to start-up.
Connect the SST Dock to Mains by means of the wall adaptor included. The Status light turns on.
Then use the ON / OFF key (fig 1. part 16 and part 2) to power on the touch screen.
5
Advertisement
Table of Contents
