Table of Contents
Advertisement
TROUBLESHOOTING
Detector fails bump, fresh air or calibration:
1.
If fresh air fails, verify the filter is not clogged and the air at the inlet is not contaminated.
2.
Check if gas bottles are connected, sufficiently pressurized and contain the right gas.
(information on the bottle)
3.
Verify the station function with a known functional detector.
Detector fails alarm test:
1.
Redo the test
2.
Manually inspect the detector for LED, vibration and audio alarms
3.
Test a known fully functional detector in the station to verify station function
Station fail:
1.
Clear fault and retry
2.
Contact service representative
CONTACT INFORMATION
Klaverbaan 121, 2908 KD, Capelle a/d IJssel, the Netherlands
info@watchgas.com | www.watchgas.com
SST Dock | QSG | V 1.0 | EN | 28-04-23
WatchGas is dedicated to continuously improving its products. Therefore, the specifications and features mentioned in this QSG are subject to change without prior notice.
© 2023 WatchGas B.V.
11
Advertisement
Table of Contents
