Page 1
Included manual swipe MSR (Magnetic Stripe Reader.) ISO standard. l Include manual swipe barcode reader. For code 39 only. l Provides the RS-232 interface. Baud rate from 2400 to 19200 bps. l Provides the AT keyboard interface. Version: 1.21 (2002.04.19)
ORDERING INFORMATION M o d e l KB18LD2- X0- R KB18LD2- X0- K KB18LD2- E1- R KB18LD2- E1- K KB18LD2- E2- R KB18LD2- E2- K KB18LD2- E3- R KB18LD2- E3- K KB18LD2- E5- R KB18LD2- E5- K KB18LD2- E6- R KB18LD2- E6- K KB18LD2- E7- R KB18LD2- E7- K...
Connector type: D- sub 9 pin (Female) Signal Connector type: DC- jack Signal 2. AT Keyboard Connector type: PS/2, male for PC, female for standard keyboard Description Gold cross point, linear feel 19 (18keys of 1x1, 1key of 1x2) Liquid Crystal display...
Page 4
COMMAND H O M /Move cursor to home position/ Dec. Format 〔011 〕 Hex. Format 〔0Bh〕 Description Moves the cursor to the left- most position of the upper line /Clear display screen, and cursor to home/ Dec. Format 〔012〕 Hex. Format 〔0CH〕 Description Clear display screen, and cursor to home /Move cursor to lower line left- most position/ Dec.
Page 5
/Clear EEPROM and reset/ ※ 6 (except KB18LD- X0) DCE”@ ” Dec. Format 〔 030〕 〔 064〕 Hex. Format 〔 1Eh〕 〔 40h〕 Description Clear EEPROM and wait 15 sec DCE “&” n I 〔 DATA〕 * I / Set user defined key code /※ 4 Dec.
Page 6
/Enable keyboard beep echo/ Dec. Format 〔022〕 Hex. Format 〔16h〕 Description Enable beep echo to valid key press /Disable keyboard beep echo/ Dec. Format 〔023〕 Hex. Format 〔17h〕 Description Disable beep echo to valid key press Valid key press echo to LCD/ Dec.
Page 7
※ 1. Key position n and default key code ※ 2. LCD display position n is ※ 3. Example for MSR/Barcode data format n =30h____Not send [ ] and CR n =31h____Not send [] and send CR n =32h____Send [] and no CR n =33h____Send [] AND CR n =34h____Send start/end sentinel of card track data n =35h____No send start/end sentinel of card track data...
Page 8
※ 5. Example for Set key code status Host send to pin- pad: DCE “%” [31h][30h] and pin- pad echo to Host; “ O K ” Valid key position [31h] is defined to be Null key. ※ 6. Example for Clear EEPROM and reset Host send to pin- pad: DCE “@”...
This manual is also suitable for:
Kb18ld2-x0-rKb18ld2-x0-kKb18ld2-e1-rKb18ld2-e1-kKb18ld2-e2-rKb18ld2-e2-k...
Show all