Table of Contents
Advertisement
I N S TA L L AT I O N G U I D E L I N E S
CAUTION: Falling fixtures can cause severe injury or serious equipment damage! For this
reason, fixtures should be installed and inspected only by qualified personnel. Do not in-
stall the unit if you lack the qualifications to do so, or if you have doubts about the safety
and security of the installation setup or location!
SAFETY CABLE:
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN A SUSPENDED ENVIRONMENT
TO ENSURE THAT THE FIXTURE WILL NOT FALL IF THE CLAMP FAILS. ONLY USE DESIGNATED RIGGING
POINTS FOR SAFETY CABLE, AND NEVER ATTACH A SAFELY CABLE TO A CARRYING HANDLE.
ART-NET CONNECTION
When connecting fixture to a network switch to control multiple devices, a Gigabit Ethernet
Switch that supports IGMP (Internet Group Management Protocol) is required. Using a
Gigabit Ethernet Switch that does not support IGMP can cause erratic behavior of all con-
nected devices to the switch. Click link below for more information about IGMP.
https://en.wikipedia.org/wiki/Internet_Group_Management_Protocol
12
Advertisement
Table of Contents
