IFM DTI420 Operating Instructions Manual page 16

DTI420 DTI421
Status bit
Cmd End
Cmd Start Acknowledge
Cmd Antenna deactivate
Cmd Start
The following status bits cannot be used in the "Read UID" operating mode:
u Cmd Start
u Cmd Start Acknowledge
u Cmd End
16
Value Description
1 Read or write operation terminated
0 Start of a read or write operation not acknowledged
1 Start of a read or write operation acknowledged
0 Activate antenna
1 Deactivate antenna
0 Reset trigger for read or write operation
1 Set trigger for read or write operation